Dual-layer glass microfiber cartridge
MicroFiber Protec
Two glass microfiber layers in series for fluids with a high colloidal load
- 0.45 – 20 µm
- 10″–40″
Prefiltration
MicroFiber Plus
Glass microfiber cartridge
Prefiltration with graded-density, high-area glass microfiber
Graded-density glass microfiber cartridge, 0.45 to 40 µm, with 0.8 m² per 10″. Membrane prefilter for beverages, water, and pharmaceuticals.
- Line
- MicroFiber · Glass microfiber
- Ratings
- 0.45 µm to 40 µm
- Lengths
- 10″ · 20″ · 30″ · 40″
- Manufacturing
- Argentina · ISO 7 cleanroom
Description
The MicroFiber Plus is a glass microfiber filter cartridge for prefiltration of fluids ahead of final membrane filters. Its depth medium, with a graded-density structure and 0.8 m² of area per 10″, traps particles, colloids, and other contaminants throughout its thickness.
It is designed to extend the service life of 0.2, 0.45, and 0.65 µm final membranes. The structure of the medium allows high flow rates with a low pressure drop.
It is 100 % thermally welded, with no adhesives: the glass microfiber is inert and does not shed fibers, and the core, cage, and other components are polypropylene. It withstands steam sterilization at 121 °C and sanitization with hot water at 80 °C or with chemicals. It is manufactured in a cleanroom environment, with materials that comply with FDA 21 CFR for food and beverage contact.
0.8 m² per 10″
Graded-density depth medium that retains contaminants throughout its structure.
From 0.45 to 40 µm
Eight micron ratings: 0.45, 0.6, 1, 3, 5, 10, 25, and 40 µm.
High flow, low pressure drop
The filter medium structure handles high flows with minimal pressure drop.
Protects 0.2 to 0.65 µm membranes
Prefilter for 0.2, 0.45, and 0.65 µm final membranes.
100 % thermally welded
No adhesives. Inert glass microfiber that does not shed fibers; polypropylene core and cage.
Steam at 121 °C and water at 80 °C
Multiple cycles of 30 to 60 minutes in single-open-end cartridges; it also withstands chemical sanitization.
Technical specifications
Request the PDF catalogMaterials
| Filter medium | Glass microfiber |
|---|---|
| Upstream and downstream supports | Polypropylene |
| Cage, core, and end caps | Polypropylene |
| O-rings and gaskets | Silicone (standard), EPDM, Buna-N, Viton® |
| Construction | 100 % thermally welded, no adhesives |
Dimensions
| Filtration area | 0.8 m² (8.6 ft²) per 10″ module |
|---|---|
| Lengths | 10″, 20″, 30″, and 40″ (254, 508, 762, and 1,016 mm) |
| Outside diameter | 2.7″ (68 mm) |
Operating conditions
| Maximum operating temperature | 80 °C (176 °F) |
|---|---|
| Maximum differential pressure (forward) | 5.5 bar at 25 °C |
| Maximum differential pressure (reverse) | 2.1 bar at 25 °C |
Sterilization and sanitization
| Steam sterilization | Multiple cycles of 30 to 60 minutes at 121 °C, in-line or in an autoclave (1) |
|---|---|
| Hot water sanitization | Multiple cycles of 30 to 60 minutes at 80 °C (1) |
| Chemical sanitization | Multiple cycles of 30 to 60 minutes with peracetic acid or sodium hydroxide up to 1 % (10,000 ppm) |
| Note (1) | Suitable only for single-open-end cartridges |
Quality and compliance
- Materials that comply with FDA 21 CFR for food and beverage contact
- Manufactured in a cleanroom environment
Applications
- Beverages: prefiltration of wine, beer, bottled water, juices, and liqueurs
- Fine chemicals: filtration of solvents, reagents, and water
- Water: prefiltration of reverse osmosis (RO) systems and process water
- Pharmaceuticals: clarification of solutions and protection of sterile filters
- Cosmetics: filtration of lotions, creams, and perfumes
Frequently asked questions
What micron ratings does the MicroFiber Plus come in?
Eight: 0.45, 0.6, 1, 3, 5, 10, 25, and 40 µm, in lengths of 10″, 20″, 30″, and 40″.
Does it shed fibers?
No. The glass microfiber is inert and does not shed fibers, and the cartridge is 100 % thermally welded, with no adhesives.
What temperature and pressure can it withstand?
Up to 80 °C operating temperature. The maximum differential pressure is 5.5 bar at 25 °C forward and 2.1 bar at 25 °C reverse.
Can it be steam sterilized?
Yes, with multiple cycles of 30 to 60 minutes at 121 °C, in-line or in an autoclave, in single-open-end cartridges. It also withstands hot water at 80 °C and peracetic acid or sodium hydroxide up to 1 %.
Which membranes is it a prefilter for?
For 0.2, 0.45, and 0.65 µm final membranes, whose service life it extends.
MicroFiber line
Other models in the line
Dual-layer glass microfiber cartridge
MicroFiber Max
High-density prefiltration for critical clarification and membrane protection
- 0.45 – 1.2 µm
- 10″–40″
Technical blog
Further reading
Prefiltration: how to protect the final filter and lower the cost per liter filtered
Prefiltration that protects the final filter: depth, pleated and hybrid media, nominal vs. absolute ratings, and how to stage the steps to filter more liters.
Wine filtration step by step: from coarse filtration to the filler
Wine filtration in stages: coarse filtration, clarification, final filter protection, and the membrane before the filler, with housings, integrity, and sanitization.
Talk to engineering
Shall we quote the MicroFiber Plus?
Tell us the fluid, the flow rate and the operating conditions. We reply with the model, the ordering code and the technical documentation.