Industrial filters

AeroSep Retrofit Coalescer

Pall® LG coalescer replacement

Direct replacement for Pall® LG series coalescers, with no housing modification

Liquid/gas coalescer cartridge that replaces Pall® LG series cartridges with the same diameter, length, and seal: it fits the installed housing unmodified.

Line: AeroSep · Pleated glass fiber
Lengths: 5″ · 10″ · 30″ · 40″
Manufacturing: Argentina

Request a quote

AeroSep Retrofit Coalescer, pall® LG coalescer replacement by Exova

Description

The AeroSep Retrofit Coalescer replaces Pall® LG Liquid/Gas series coalescer cartridges in dimensions and function. It keeps the original's diameter, length, and sealing system, so it fits the installed housing without modifications or additional engineering.

It reproduces the geometry of the original cartridge with a graded-pore coalescing medium of resin-bonded glass fiber, hydrophobic and oleophobic (grade H), and with a core and cage sized for high-pressure service. It captures oil and water droplets and solids from air and gas streams; the coalesced liquid drains to the bottom of the housing without returning to the outlet gas.

Versions are available in 57, 70, and 152 mm diameters, in 5, 10, 30, and 40″, with an SOE seal (piston or internal O-ring) or DOE with a flat gasket, for standard (< 250 psig) or high-pressure (> 250 psig) service. The equivalence table cross-references the six Pall LG references with their AeroSep codes.

Same diameter, length, and seal

Each reference reproduces the nominal dimensions and sealing configuration of the corresponding Pall® cartridge.

No housing modification

Fits the installed housing and requires no additional engineering. Compatibility is verified before delivery.

Grade H medium

Resin-bonded glass fiber, hydrophobic and oleophobic, fixed-pore and non-shedding.

Low and high pressure

Versions for standard service, below 250 psig, and for above 250 psig, with a core and cage for high pressure.

Six cross-references

1:1 equivalence with CC05LGH13, CC1LGA7H13, CC3LGA7H13, CC3LGB7H13, CC3LG02H13, and CS604LGH13.

Lot traceability

Quality certificate and lot number for each element. Selection and validation guide available on request.

Technical specifications

Request the PDF catalog

Filter medium

Medium	Resin-bonded glass fiber, hydrophobic and oleophobic
Grade	H (high coalescing efficiency)

Dimensions and sealing

Diameters	57, 70, and 152 mm
Lengths	5″, 10″, 30″, and 40″
Seal configurations	SOE with piston or internal O-ring; DOE with flat gasket
Service pressure	Standard (< 250 psig) or high (> 250 psig)
Gaskets and O-rings	Buna, Viton, Viton/PTFE, EPDM, silicone, or Teflon, depending on the fluid

Installation and change-out

Start-up	Check the boot drain and record the ΔP with the new element installed
Mounting	Observe the element's orientation in the housing
At each change-out	Inspect the condition of gaskets and O-rings
Traceability	Keep the lot number of the installed element

Quality and compliance

Manufactured in a controlled environment, with a fixed-pore, non-shedding medium
Compatibility with the installed housing verified before delivery
Quality certificate per lot and traceability by lot number
Selection and validation guide available on request

Selection data

Pall® LG series references it replaces
Pall® reference	Ø	Length	Seal	Pressure
CC05LGH13	57 mm	5″ (127 mm)	SOE internal O-ring	High (> 250 psig)
CC1LGA7H13	70 mm	10″ (254 mm)	SOE piston O-ring	Standard (< 250 psig)
CC3LGA7H13	70 mm	30″ (762 mm)	SOE piston O-ring	Standard (< 250 psig)
CC3LGB7H13	70 mm	30″ (762 mm)	SOE piston O-ring	High (> 250 psig)
CC3LG02H13	70 mm	30″ (762 mm)	DOE flat gasket	High (> 250 psig)
CS604LGH13	152 mm	40″ (1,016 mm)	SOE piston O-ring	High (> 250 psig)

For each reference, the AeroSep Retrofit Coalescer reproduces the nominal dimensions and sealing configuration of the corresponding Pall cartridge. Pall nomenclature is cited for replacement compatibility purposes only. Pall® is a registered trademark of Pall Corporation. AeroSep is an equivalent Exova product, not a Pall original.

Applications

Natural gas and CNG
Compressed air and instrument air
Petrochemicals and refining
Biogas and process gases
Protection of compressors, turbines, membranes, and dryers

Industries

Oil & Gas and power SaniFlow filter housings

Frequently asked questions

Does the housing need to be modified?

No. The AeroSep Retrofit Coalescer keeps the diameter, length, and sealing system of the original Pall® LG cartridge, and fits the installed housing without modifications or additional engineering.

Which Pall references does it cover?

Six: CC05LGH13, CC1LGA7H13, CC3LGA7H13, CC3LGB7H13, CC3LG02H13, and CS604LGH13. Each has its AeroSep equivalent, with the same dimensions and seal.

How is the replacement confirmed?

Note the brand and the code printed on the installed cartridge; check the outside diameter, the length, and the seal type at the ends; and confirm the operating pressure and the elastomer compatible with the fluid. With that data, the AeroSep code and availability are confirmed.

Is it suitable for high pressure?

Yes. There are versions for standard service, below 250 psig, and for above 250 psig, with a core and cage sized for high pressure.

What if the reference is not in the table?

Send the brand and code of the installed cartridge, along with the operating conditions, and the AeroSep equivalent and delivery availability will be confirmed.

AeroSep line