Membrane cartridges

UltraPure Plus F&B

Nylon 6,6 membrane cartridge

Microbial stabilization of food and beverages with 9,500 cm² per 10″

Nylon 6,6 membrane cartridge from 0.1 to 1.2 µm with 9,500 cm² per 10″, for microbial stabilization and particle removal in food and beverages.

Line: UltraPure · Nylon 6,6
Pore sizes: 0.1 µm to 1.2 µm
Lengths: 10″ · 20″ · 30″ · 40″
Manufacturing: Argentina · ISO 7 cleanroom

Request a quote

UltraPure Plus F&B, nylon 6,6 membrane cartridge by Exova

Description

The UltraPure Plus F&B is an extended-area nylon 6,6 membrane filter cartridge: 9,500 cm² per 10″. It is designed for microbial stabilization and particle removal in the food and beverage industry, as a final filter or as upstream protection for final filters.

The extended area, combined with a naturally hydrophilic membrane, allows high flow rates with a very low pressure drop. The 0.1 and 0.2 µm ratings retain more than 10⁷ Brevundimonas diminuta per cm², according to the FDA definition of sterilizing-grade filters.

100 % of the cartridges are tested at the plant, and integrity is checked at origin by diffusive flow. The cartridge also has diffusive flow and bubble point integrity values so that users can repeat the test at their facility.

It withstands repeated steam sterilizations, in-line or in an autoclave, and sanitization with hot water at 80 °C and chemical cleaning and disinfection agents, so it can be reused.

9,500 cm² per 10″

Extended area that, together with the hydrophilic membrane, provides high flow rates and a very low pressure drop.

Declared retention by rating

0.1 and 0.2 µm: more than 10⁷/cm² of Brevundimonas diminuta. 0.45 µm: Serratia marcescens. 0.65 µm: Saccharomyces cerevisiae.

100 % integrity tested

Checked at the plant by diffusive flow, with diffusive flow and bubble point values for repeating the test at the facility.

Sterilizable and reusable

Multiple cycles of 30 to 60 minutes with steam at 121 °C, in-line or in an autoclave, and with hot water at 80 °C.

Suitable for food contact

FDA 21 CFR 177 materials, Directive 2002/72/EC, and migration testing per the Argentine Food Code and Mercosur SGT3.

Manufactured in an ISO 7 cleanroom

After manufacturing, each cartridge is rinsed with purified water to remove manufacturing extractables.

Microbial retention

Values stated in the UltraPure Plus F&B catalog.

0.1 µm > 10⁴/cm² Acholeplasma laidlawii

0.1 and 0.2 µm > 10⁷/cm² Brevundimonas diminuta According to the FDA definition of sterilizing-grade filters

0.45 µm > 10⁷/cm² Serratia marcescens

0.65 µm > 10⁷/cm² Saccharomyces cerevisiae

Technical specifications

Request the PDF catalog

Materials

Filter medium	Nylon 6,6
Outer and inner support layers	Polypropylene
Outer cage and core	Polypropylene
Flat ends and fin	Polypropylene
Adapter (222 and 226)	Polypropylene with internal reinforcement
O-rings	Silicone, Viton, Buna, EPDM, PTFE-encapsulated Viton

Dimensions

Nominal filtration area	9,500 cm² per 10″
Nominal length	10″ (254 mm), 20″ (508 mm), 30″ (762 mm), and 40″ (1,016 mm)
Nominal diameter	2.75″ (70 mm)

Operating conditions

Maximum differential pressure	5.5 bar (80 psi) at 25 °C
Maximum differential pressure in reverse flow	0.69 bar (10 psi) at 25 °C
Maximum differential pressure for change-out	2 bar

Sterilization and sanitization

Steam sterilization	Multiple cycles of 30 to 60 minutes at 121 °C, in-line or in an autoclave (1)
Hot water sanitization	Multiple cycles of 30 to 60 minutes at 80 °C (1)
Chemical sanitization	Multiple cycles of 30 to 60 minutes with peracetic acid up to 1 % (10,000 ppm), at room temperature
Chemical cleaning	Multiple cycles of 30 to 60 minutes with sodium hydroxide up to 1 % (10,000 ppm) (1)
Note (1)	Recommended only for single-open-end cartridges with internal reinforcement at the 226 / 222 O-ring fitting

Quality and compliance

Materials compliant with FDA 21 CFR 177 for food contact
Complies with European Commission Directive 2002/72/EC on plastic materials in contact with food, with its amendments up to 2008/39/EC
Non-toxic components according to the migration test of the Argentine Food Code and Mercosur SGT3 standards
Manufactured in an ISO 7 cleanroom
Rinsed with purified water after manufacturing, to remove extractables
Integrity of 100 % of the cartridges tested at the plant and checked at origin by diffusive flow

Applications

Final filtration of bottled water
Final filtration of wine
Prefiltration ahead of final filters
Final filtration of unpasteurized alcoholic beverages
Pharmaceutical solutions
Biological solutions
Culture media

Industries

Food and beverage Wine industry Water treatment Pharmaceutical and biotech SaniFlow filter housings

Frequently asked questions

How much filtration area does it have?

9,500 cm² per 10″ of length. It is made in 10″, 20″, 30″, and 40″, with a 2.75″ (70 mm) diameter.

Can it be used as a final filter for wine?

Yes. The catalog specifies it for the final filtration of wine, bottled water, and unpasteurized alcoholic beverages, and as a prefilter ahead of final filters. For yeasts, the 0.65 µm rating retains more than 10⁷ Saccharomyces cerevisiae per cm².

Can it be steam-sterilized in place?

Yes. It withstands multiple cycles of 30 to 60 minutes at 121 °C, with in-line steam or in an autoclave, and the cartridge can be reused. It is recommended only for single-open-end cartridges with internal reinforcement at the 226 or 222 O-ring fitting.

Can I test the integrity at my plant?

Yes. 100 % of the cartridges are tested at the factory and integrity is checked by diffusive flow; in addition, the cartridge has diffusive flow and bubble point integrity values so that users can repeat the test.

Which chemicals can be used for sanitizing and cleaning?

Peracetic acid up to 1 % (10,000 ppm) at room temperature for sanitizing, and sodium hydroxide up to 1 % (10,000 ppm) for cleaning, in multiple cycles of 30 to 60 minutes.

UltraPure line